Results 1 - 26 of 26
$300.00 each

STAINED GLASS by EDA

Please click on "Available Options" to see available panels

$120.00 each

30582-01 INTERSPIRO RAIL (RAIL WIRE & NUTS)

One Accessory Rail, Wire Mount, and

Thumb Screws.

Click on options tab to purchase with the Inodive LED

Light or Universal Slide.

 

The accessory rail system easily attaches to the Interspiro (AGA) full face mask and makes it possible to mount and dismount various devices to the sides of the Interspiro full face mask mask. Dive lights, video lights, video cameras, sonar, manifold blocks, and welding visors are just a few examples of the equipment that works well with the rail system. Devices are attached to the removable slide and then slid on to the rail. The slide is released from the rail by pressing the release button.

  The rail stays mounted on the mask, while the devices are attached to slides. The camera, lights and other devices are then changed by simply sliding them on or off the rail. This quick disconnect feature allows surface support to quickly exchange or replace devices as the mission dictates without removing the mask from the diver, or the diver from the water. One rail may be used or two may be mounted (one on each side). The attachment method does not interfere with commonly used surface breathing valves.

   Attaching the rail system to the AGA mask makes it possible for a diver to have both hands free to accomplish difficult tasks under water.

Interspiro MK II (AGA) Welding Visor

This welding visor is mounted to the Interspiro mask using the Accessory Rail System and is used with standard 2” X 4.25” shielding glass. Once the Rail System is mounted to the mask the welding visor can be quickly installed, or removed, by pressing the release buttons located on both sides of the visor hinges. The visor can be rotated up for an unobstructed view when necessary. Lights and cameras that are mounted to “Slides” can be slid onto the Accessory Rails while the visor is mounted.

Please call for pricing and to purchase this item.

$119.73 each

920014-000 OTS GUARDIAN BARE RAIL (NUTS, RAIL, WIRE)

One Accessory Rail for the Guardian Full Face

Mask with mount and thumb screws.

 

       Please purchase the Accessory Rail for the

          Guardian Mask from OTS, or your local

                                OTS dealer.

                *** Prices listed are for reference

 

Accessory Rail Only  920014-000

With Universal Slide  920013-000

With Inodive LED Light mounted on Slide 920012-00

 

$144.00 each

920015-00 UNIVERSAL SLIDE WITH 2 CLAMPS

920015-00 (1) UNIVERSAL SLIDE WITH 2

CLAMPS

 

Click on the tab to view options .

 

The Universal Slide serves as a mount for video cameras, lights, heads up displays, and other devices. After a device is mounted to the Universal slide it can be slid onto any dive equipment (masks/hats,ROV) that has the Accessory Rail attached, and then quickly removed by pressing the release button. this feature makes it easy to use one video camera on different divers, a ROV, or mounted on the Accessory Rail Pole Knuckle. Surface support can exchange devices that have been pre mounted to the Universal Slide with out removing a diver from the water, and with no tools. This "Quick Exchange" feature is important when circumstances change during a dive and different equipment is needed, or when changing out divers. The cameras, and lights are moved between divers quickly, and efficiently. Each Accessory Rail will accept two Universal Slides.

$182.94 each

10600-00 KM SL 17/37 ACCESSORY RAIL for fiberglass hats (Left & Right with Support)

10600-00 KM SL

17/37/97ACCESSORY

RAILS for fiberglass hats 

(Left & Right with Support)

 

 

The Innovative Dive Equipment Accessory Rail System easily attaches to KM Dive Hats. After mounting various cameras, and lights to the removable slides they can be quickly attached, removed, or replaced with out using tools. Simply depress the release button and slide the device off the Accessory Rail.

The Accessory Rails for the fiberglass hats are purchased in pairs (left, & right) with a tie bar that runs under the handle connecting the two rails. This design prevents the mounts from shifting during use.

$71.76 each

10700-00 KM SL 17/37 FIBERGLASS HAT PORT WEIGHT MOUNT ACCESSORY RAIL

10700-00 KM SL 17/37 FIBERGLASS HATS PORT WEIGHT MOUNT WITH ACCESSORY RAIL. Can only be used on hats with the port weight.

$104.09 each

10802-00 KM BAND MASK ACCESSORY RAIL

10802-00 KM BAND MASK ACCESSORY RAIL

10489-00 KM M-48 Mod 1

Accessory Rail quick disconnect for Light/Camera Mounting. Lights and cameras are mounted on our Universal Slides and then easily switched between any equipment that has the Accessory Rail System mounted. We fabricate special mounts on request for mount various devices to our Slides.

                   Please call or email for additional information

$85.00 each

10800-00 GORSKI HAT ACCESSORY RAIL

10800-00 GORSKI HAT ACCESSORY RAIL

$59.95 each

INODIVE C LED LIGHT

500' depth rating with a Cree XRE LED, produces 175 Lumens. Uses 2 "C" Alkaline batteries with approx. 10 hour burn time. The case is ABS/Lexan and has a double O-Ring seal. The light is turned on and off by rotating the light head. This is a robust, rugged light suited for commercial use.

                               This light is manufactured by Tecktite for Innovative Dive Equipment Inc.

This light is used with the Accessory Rail System and mounts to a Universal Slide with a stainless steel  hose clamp.

$40.70 each

INODIVE LED LIGHT

The Inodive Light is a compact LED dive light. Light is produced by a white led that produces 80 Lumens/1 Watt, and it will burn for approximately 4 hours on two double AA batteries. Stainless steel battery contact are used, and the light housing is polycarbonate with a 150' depth rating. The light output is considerably brighter then what you would expect from a light its size and works very well in turbid water. The light has a double O-Ring seal and a magnetic switch (On-Off-Flash).

This light is used with the Innovative Dive Equipment Accessory Rail System,

and comes with a mount to attach it to an Accessory Slide.

 

 

$60.60 each

DARKBUSTER LED LIGHT

   Light output is 3 Watt's/250 Lumens with Cree XPE LED bulb. The light is rated to 300' and made with a polycarbonate case. 4 hours on high power using 3 AAA Alkaline batteries. Twisting the light head on and off cycles the light through full power - low power - flash.

 

This light is used with the Accessory Rail System and mounts to a Universal Slide with a stainless steel  hose clamp

$106.00 each

ACCESSORY RAIL SYSTEM POLE KNUCKLE

The Innovative Dive Equipment Pole Knuckle allows for the quick attachment, and removal of submersible video cameras and lights when it is desirable to drop a camera on a pole for searching confined spaces, or to check for hazards before a diver enters the water.

 

The camera and lights are attached to a “Universal Slide” (available separately) which is then easily slid on to the accessory rail on the pole knuckle. After use the camera and light can be removed from the knuckle while still mounted on the universal slide, and then slid onto an accessory rail on the divers mask to further document the dive.

$23.50 each

CHAIN SLING RECOVERY TOOL

Use this tool to push & pull chains and slings while performing underwater recovery operations on submerged vehicles and vessels. With this tool your reach is extended enabling a diver to reach into areas when a chain or sling is just out of reach. It also helps keep a diver from having to get underneath unstable objects to place or remove chains, & slings. Tow truck operators also use this tool in much the same way as divers to avoid placing their bodies in precarious positions under unstable vehicles or other objects.

 

Because the handle is slightly offset, a diver can determine which direction the hook is facing when using the tool in no, or low visibility conditions. The tool is manufactured from 3/8” round aluminum alloy, and resists corrosion and oxidation.

The tool measures 22 ¾ inches over all. Across the handle 5 ½ inches, and across the hook 3 inches

$18.00 each

SSB 2010 COMMS BRACKET

The Innovative Dive Equipment Inc. "Comms Bracket" is the answer to problems mounting the OTS 2010 comms box to your dive equipment. It enables the diver to place the comms unit in the most favorable position for underwater communication while in the horizontal searching position, as well as other positions.

The bracket allows the use of the tank band to hold the comms box, and does not interfere with tightening, or securing the tank band. The bracket is manufactured from 3/16 inch 304 stainless steel wire and is suitable for all diving environments.

This simple device is used by Public Safety, & Military divers to mount the OTS SSB 2010 to their SCUBA diving rigs. It may also be used to anchor other diving accessories.

$29.00 each

Dust Cap & Plug For AGA Divator MK II.

These dust caps and plugs are used to prevent foreign objects like dust, dirt and moisture from entering the Divator second stage, and intermediate hose.

 

Most users of the Divator FFM do not leave the mask attached to the intermediate hose when not in use. As a result, when the mask and hose are separated, moisture and other debris can easily enter the hose or second stage.

As can be seen in the picture, both the mask cap, and hose plug, have holes provided to attach a retention lanyard to help prevent loss.

The dust cap, and plug are manufactured from solid brass, and then protected with an “Electroless‐Nickel Plating”.

$52.50 each

EL-A 98 Degree, 9/16-18 Male to AGA Female

This adaptor allows a standard US low pressure regulator hose to be used with the Interspiro Divator MK II (AGA) Full Face Mask. In addition, the adaptor provides a 98 degree angle at the point it attaches to the MK II second stage. This is an important feature for Public Safety/Military divers who usually route their low pressure hose down to a manifold block.

This also decreases the chance for entanglement by placing the hose in close to the diver.
****MSRP for this adaptor is $49.99****


Our Low Price $45.00

This adaptor is new, and is manufactured by “OmniSwivel International”. It is constructed from solid brass, and protected with an "Electroless Nickel Plating".

$43.00 each

920038-00 COMBINATION MOUNT WITH SCREWS

920038-00 COMBINATION MOUNT WITH SCREWS (BARE)

$20.00 each

100-10 SOLA MOUNT (METAL MOUNT ONLY)

100-10 SOLA MOUNT (METAL MOUNT ONLY)

$36.50 each

2002-002 OTS REPLACEMENT WIRE

2002-002 OTS REPLACEMENT WIRE

$36.38 each

920016-00 OTS REPLACEMENT THUMB SCREWS

920016-00 OTS REPLACEMENT THUMB SCREWS

$36.38 each

200016-00 INTERSPIRO REPLACEMENT THUMB SCREWS

200016-00 Interspiro REPLACEMENT THUMB SCREWS

$40.71 each

2017-000 INTERSPIRO WIRE MOUNT ONLY

2017-000 INTERSPIRO WIRE MOUNT ONLY

$30.72 each

920018-00 KIT TO CONVERT SLIDE TO UNIVERSAL MOUNT

920018-00 KIT TO CONVERT SLIDE TO UNIVERSAL MOUNT

The cart is empty
You are here: Home Products